Ornament Tree Accessories |
| | Revolving, Rotating, Rolling & Replacement Stands For Artificial or Metal Ornament TreesDouble the impact of your ornament tree or holiday display by adding motion! |
Click on photo for close up. | Give your holiday display more decorating flexibility than ever. Put your tree where you want it or move it from room to room using these new rolling stands for metal or artificial ornament trees. 21" stand: for a 1-1/4" center diameter pole on a tree up to 5-1/2 feet tall weighing up to 40 lbs when decorated. 27"stand: for a 1-1/4" center diameter pole on a tree up to 6-1/2 feet tall weighing up to 60 lbs when decorated. Rolling tree stand must be assembled (minor). Dark green with hard black plastic wheels. | Style # 8449807 - 21"
$36 + S/H | Style #8449808 - 27"
$48 + S/H |
Click photo for close up
Style #8449809
$44 + S/H
| Adjustable green revolving ornament tree base adjusts to fit any indoor metal or artificial tree with a shank (pole, center, stem) 1-1/4" in diameter or less, up to 6 ft tall, weighing up to 50- 60 lbs when decorated. Tree stand must be assembled and is approx. 9" tall x 27" in diameter when completed. Stand has an on-off switch and a plug at the top of the base for the lights which must be wound around the trunk of the tree at the base. With a separate attached cord for plugging into the wall receptacle, a lighted tree will rotate freely and lights will not be tangled around the base of the stand. Tree must be absolutely straight in the holder. Rotates very slowly at approximately 1-2 revolutions per minute. Indoor Use Only. Please note, the tree lights and the rotation work together. If the switch on the stand is off, your tree lights will be off as well. After December 1st, subject to availability. |
| !! Temporary Hold on orders. Our supplier for this item is having difficulty locating new heavy duty motors for this stand. Until further notice, please do not order!! Custom Made Decorative 18" (shown below) 24" and 30" Motorized, Revolving Rotating Christmas Tree Stand With Melamine Platform
|
Motorized revolving tree stand covered with silver mosaic tile skirting, Melamine platform.
| 
Motorized rotating tree stand covered with gold mosaic tile skirting, Melamine platform.
|
Available in 18", 24" and 30" diameter.On/Off switch, 5" tall base with top & motor. Motor is 9" in diameter. Slowly rotates at 1 rpm.Motor is rated up to 15 Amps for standard USA household 110 volt current.For a metal or artificial decorated Christmas tree or display up to 7 ft tall, weighing up to 250 lbs with up to 2000 mini lights. Can also be used with larger light bulb sets.Tree light cord slips through a hole in the top to plug into an electrical outlet in the base for tangle-free rotation.Under no circumstances should this stand be used in, near or to display a person or an item that requires or utilizes water or other liquid.Final order date for Christmas is December 10th. Please allow 10 business days for fabrication and 5-7 business days for delivery.
Need to decorate a large tree and rotate it afterwards? We've made special arrangements with one of America's top manufacturers of custom made turntables to create these stands for our customers only. Includes a plug in the base of the motor that allows your lighted tree to rotate freely without a tangled cord. The entire display will rotate slowly for you at an elegant 1 RPM ( 1 revolution per minute). The 5" H x 9" W base of the stand is covered with a beautiful gold or silver mosaic mirrored plastic cloth. The stand operates on regular 110 volt household current and has a 3-prong polarized plug on a 6 ft black electrical cord to plug into your wall. If you need to use an extension cord, it should be a heavy duty cord rated the same as the plug on the stand. There is a push button on/off. However the manufacturer says it is easier to use the cord/plug itself as your "on/off." The sturdy melamine platform top is available in 18", 24" and 30". Platforms larger than 30" will not rotate correctly on the current motor housing he is presently using (yes, we did ask!) The manufacturer also says you can paint the detachable melamine platform top to match your holiday decor. Just make sure to sand the smooth surface first and use paint that is made for melamine surfaces or countertops. A tree skirt, cloth, or even mini lights can be laid on the uncovered melamine platform. While the stand is in use, keep the area around the outlet uncovered.
Commercial quality, custom made for you, one year guarantee on the motor and top under normal wear. Rotating tree platform must be assembled (top to base). Allow sufficient air circulation around the metal motor housing which includes a fan. Not intended for 24/7/365 use and should not be left to rotate unattended. A slight humming noise during operation is normal. PLEASE NOTE: THIS STAND IS CUSTOM MADE FOR YOU AND IS NOT RETURNABLE. All 24"-30" rotating tree platforms ship from the manufacturer in an oversized box. The "Buy Now" pricing includes an oversize box fee. Includes instructions for caring for the motor. A signature will be required at delivery. Due to variances in electrical power, voltages and current worldwide, this item can not be sold for use outside of the United States.
Easy to assemble. Set your un-decorated metal or artificial tree on the large diameter white melamine platform, push your light cord through the hole in the deck, plug it in and decorate!
|
| !!Temporary Hold on orders. Our supplier for this item is having some difficulty locating new heavy duty motors for this stand. Until further notice, please do not order!! | Large Revolving Christmas Tree Platform With A Gold Mirrored Skirt around the Base
| 18" Gold
( 3-4 ft tree)
$375 + S/H | 24" Gold  + $5
(5-6 ft tree)
$407 + S/H | 30" Gold + $5
(6-7 ft tree)
$465 + S/H | Large Rotating Christmas Tree Platform With A Silver Mirrored Skirt around the Base
| 18" Silver
( 3-4 ft tree)
$375 + S/H | 24" Silver + $5
(5-6 ft tree)
$407 + S/H | 30" Silver + $5
(6-7 ft tree)
$465 + S/H |
|
